Wheel Bearing Repack & Adjust - Front (Serviceable) labor time
Wheel Bearing Repack & Adjust - Front (Serviceable) takes about 1.4 hr of shop labor on a typical vehicle. Across 662 vehicle and engine combinations from 29 makes, most fall between 1.1 and 2.6 hours, and the longest take up to 4.5 hours. Porsche, Freightliner and Ram vehicles tend to take the longest; Nissan, Oldsmobile and Kia the least. The exact time depends on your car, so look yours up below or pick it on the home page.
Enter a rate to see the labor cost of each job. Many US shops charge somewhere between $100 and $200 an hour.
At $150 an hour, labor for this job is usually $165 to $390, about $210 on a typical vehicle. Parts are extra.
How long it takes across all vehicles
Hours, in half hour steps. Each bar is how many vehicle and engine combinations fall in that range.
Wheel Bearing Repack & Adjust - Front (Serviceable) time on popular vehicles
Wheel Bearing Repack & Adjust - Front (Serviceable) time by make
| Make | Typical | Most vehicles | Vehicles |
|---|---|---|---|
| Porsche | 3.3 hr | 3.3 to 3.3 | 19 |
| Freightliner | 2.9 hr | 2.9 to 2.9 | 10 |
| Ram | 2.5 hr | 2.5 to 3.0 | 44 |
| GMC | 2.5 hr | 2.5 to 2.5 | 5 |
| Volkswagen | 2.5 hr | 1.0 to 2.5 | 5 |
| Isuzu | 2.1 hr | 2.1 to 2.1 | 7 |
| Chevrolet | 2.0 hr | 1.1 to 2.1 | 42 |
| Toyota | 1.3 hr | 1.1 to 1.6 | 77 |
| Ford | 1.2 hr | 1.2 to 2.2 | 342 |
| Dodge | 1.2 hr | 1.1 to 1.2 | 7 |
| Volvo | 1.1 hr | 1.0 to 1.1 | 10 |
| BMW | 1.1 hr | 1.1 to 1.1 | 7 |
| Genesis | 1.1 hr | 1.1 to 1.1 | 6 |
| Honda | 1.0 hr | 1.0 to 1.0 | 27 |
| Kia | 1.0 hr | 1.0 to 1.0 | 14 |
| Oldsmobile | 1.0 hr | 1.0 to 1.1 | 7 |
| Nissan | 1.0 hr | 0.9 to 1.0 | 6 |
Other drivetrain repairs
- Wheel Bearing Hub - Rear
- Wheel Bearing Hub - Front
- Wheel Bearing - Press-In Rear
- Wheel Bearing - Press-In Front
- CV Boot - Inner
- CV Boot - Outer
- Differential Pinion Seal
- Differential Rebuild - Rear
- Ring and Pinion
- Differential Cover Gasket
- U-Joint
- Limited Slip Clutch Pack
Hours are flat-rate labor time: what a shop bills for the job when a professional technician does it. Figures come from the Open Labor Project database (how the data is built).